# Flash RCX 6A with SimonK firmware

## Steps

    $ avrdude -c usbtiny -p m8
    avrdude: AVR device initialized and ready to accept instructions

    Reading | ################################################## | 100% 0.01s

    avrdude: Device signature = 0x1e9307

    avrdude: safemode: Fuses OK (E:FF, H:DF, L:A4)

    avrdude done.  Thank you.

Then, flash firmware

    $ avrdude -c usbtiny -p m8 -U flash:w:./tgy.hex:i

    avrdude: AVR device initialized and ready to accept instructions

    Reading | ################################################## | 100% 0.01s

    avrdude: Device signature = 0x1e9307
    avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
    avrdude: erasing chip
    avrdude: reading input file "./tgy.hex"
    avrdude: writing flash (8192 bytes):

    Writing | ################################################## | 100% 4.93s

    avrdude: 8192 bytes of flash written
    avrdude: verifying flash memory against ./tgy.hex:
    avrdude: load data flash data from input file ./tgy.hex:
    avrdude: input file ./tgy.hex contains 8192 bytes
    avrdude: reading on-chip flash data:

    Reading | ################################################## | 100% 7.10s

    avrdude: verifying ...
    avrdude: 8192 bytes of flash verified

    avrdude: safemode: Fuses OK (E:FF, H:DF, L:A4)

    avrdude done.  Thank you.

Then, flash fuses

    $ avrdude -c usbtiny -p m8 -U lfuse:w:0x24:m -U hfuse:w:0xda:m

    avrdude: AVR device initialized and ready to accept instructions

    Reading | ################################################## | 100% 0.01s

    avrdude: Device signature = 0x1e9307
    avrdude: reading input file "0x24"
    avrdude: writing lfuse (1 bytes):

    Writing | ################################################## | 100% 0.00s

    avrdude: 1 bytes of lfuse written
    avrdude: verifying lfuse memory against 0x24:
    avrdude: load data lfuse data from input file 0x24:
    avrdude: input file 0x24 contains 1 bytes
    avrdude: reading on-chip lfuse data:

    Reading | ################################################## | 100% 0.00s

    avrdude: verifying ...
    avrdude: 1 bytes of lfuse verified
    avrdude: reading input file "0xda"
    avrdude: writing hfuse (1 bytes):

    Writing | ################################################## | 100% 0.00s

    avrdude: 1 bytes of hfuse written
    avrdude: verifying hfuse memory against 0xda:
    avrdude: load data hfuse data from input file 0xda:
    avrdude: input file 0xda contains 1 bytes
    avrdude: reading on-chip hfuse data:

    Reading | ################################################## | 100% 0.00s

    avrdude: verifying ...
    avrdude: 1 bytes of hfuse verified

    avrdude: safemode: Fuses OK (E:FF, H:DA, L:24)

    avrdude done.  Thank you.