User Tools

Site Tools

linux:arm:dockstar

OpenWRT on the Dockstar

Overview

Tools

You will need a Serial terminal and a TFTP server.

sudo aptitude install picocom tftpd-hpa

Configure the TFTP server according to your setup.

Files

Download the files for the Dockstar from the OpenWRT repository:
https://downloads.openwrt.org/chaos_calmer/15.05/kirkwood/generic/

Steps

Connect

picocom -s 115200 /dev/ttyUSB0
## All Next commands are for the Dockstar
reboot

Update U-Boot

setenv serverip 192.168.xxx.xxx

mw 0x800000 0xffff 0x80000
tftpboot 0x800000 openwrt-kirkwood-dockstar-u-boot.kwb
nand erase 0x000000 0x100000
nand write.e 0x800000 0x000000 0x80000
setenv bootcmd nand read.e 0x2000000 0x100000 0x400000\; go 0x2000000
saveenv
reboot

Configure U-Boot

# Update BootCMD
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; run ubiboot_n1'
setenv ubiboot_n1 'ubifsload 0x800000 ${kernel}; ubifsumount; bootz 0x800000'

# Reset network config
setenv ipaddr  192.168.xxx.yyy
setenv serverip 192.168.xxx.xxx
setenv netmask 255.255.255.0
setenv ethaddr ab:cd:ef:ab:cd
saveenv

Flash the RootFS

nand erase 0x200000 0xfe00000
ubi part root
ubi create rootfs 0xA00000
tftpboot 0x800000 openwrt-15.05-kirkwood-dockstar-rootfs.ubifs
ubi write 0x800000 rootfs ${filesize}
ubi create rootfs_data

Install the Kernel image

## RAM boot
setenv bootargs ${console} ${mtdparts} ${bootargs_root}
tftpboot 0x800000 openwrt-15.05-kirkwood-dockstar-zImage
bootz 0x800000;

## Download and install kernel
mkdir -p /rom/boot
wget -O /rom/boot/zImage       http://downloads.openwrt.org/chaos_calmer/15.05/kirkwood/generic/openwrt-15.05-kirkwood-dockstar-zImage

Enjoy ! Install some packages

opkg update
opkg install kmod-usb-core kmod-usb-storage block-mount kmod-fs-ext4 kmod-fs-vfat kmod-fs-ntfs kmod-nls-cp437 kmod-nls-iso8859-1 e2fsprogs fdisk kmod-usb2
Permalink linux/arm/dockstar.txt · Last modified: 2015/11/14 19:58 by Hyde179

oeffentlich