Hydev

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
# Debian with PREEMPT_RT patched kernel

## Overview

Theses short steps were tested on Debian Wheezy 7.4, x64 core.

## Steps

Create a "workspace", where you have some free disk space

    mkdir ~/rt_kern
    cd ~/rt_kern

Get the files !

    wget -c https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.14.25.tar.xz
    wget -c https://www.kernel.org/pub/linux/kernel/projects/rt/3.14/patch-3.14.25-rt22.patch.xz

Extract and patch

    tar xaf linux-3.14.25.tar.xz
    unxz patch-3.14.25-rt22.patch.xz
    cd ./linux-3.14.25
    patch -p1 < ../patch-3.14.25-rt22.patch

Get the config of your current Debian kernel

    cp -vf /boot/config-3.2.0-4-amd64 .config

Now comes the _fun_ part: __Configuring the Kernel__ That's usually the part where you screw up and build a non-working kernel.

    make menuconfig

Note: I missed some libraries so be able to run this command, you probably do too.

   sudo aptitude install libncurses5-dev

Once you get the configuration GUI, you have to select a few options:

* Enable the full RT features: `Processor type and features  > Preemption Model > (Fully Preemptible Kernel (RT))`

Save and quit (TAB until you can select the option)

Build (where X is two times the number of cores of your CPU). Took 45minutes on my 2.5Ghz Core2Duo, with SSD.

    make -jX

Or, you can directly build the debian packages (Name it as you want... I named it _-hyde_)

    make deb-pkg LOCALVERSION=-hyde KDEB_PKGVERSION=1

Install it

    cd ../
    sudo dpkg -i ./linux-image-3.14.25-rt22-hyde_1_amd64.deb 

Aaannndd reboot, select your new kernel =)

## Links

* https://rt.wiki.kernel.org/index.php/RT_PREEMPT_HOWTO