# PitiQuad

## Partlist

### Motors

* 5 x RCX H1306-2 2300KV Micro Outrunner Brushless Motor (Best for 150-230 frame) * 5 x RCX 6A ESC Brushless Motor Speed Controller (G Series)
Note: Too small, a FET burns when a prop gets blocked…

• Replace with HK10A (also quite cheap, but bigger)
• Add FETs in parallel (on their way, 6.33$/50pcs)
• Check out the _new_ SN20A

### Flight Controller

* 1 x Sparky (TauLabs) Flight Controller

* or 1 x OpenPilot CC3D Flight Controller * 1 x Electronic Bent Pin Header (3*40pin / 2.54mm / 1pc)

### Props

* 1 x 5x3" EPP5030 (*R) Counter Rotating Propellers (GM Series / CW / Red / 4pcs) * 1 x 5x3" EPP5030 (*R) Counter Rotating Propellers (GM Series / CW / White / 4pcs) * 1 x 5x3" EPP5030 Counter Rotating Propellers (GM Series / CCW / Red / 4pcs) * 1 x 5x3" EPP5030 Counter Rotating Propellers (GM Series / CCW / White / 4pcs)

### Batteries

* 1 x LI-PO SAFE BAG (Silver, 18x22cm) * 2 x RCX Li-Polymer Battery 11.1V (3 Cells) 1300mAh 30C * 1 x RCX Battery Strap (5pcs / 12x150mm) Note: Too short, use two

### Receiver

* 1 x FrSky X4R - 4 Channel Receiver * New option: MicroFrX and its _clones_ RCGroups topic

## Pictures