Differences

This shows you the differences between two versions of the page.

--- dev:nab:v2:jtag_access [2015/11/12 12:35] – [Nabaztag:tag] redox
+++ dev:nab:v2:jtag_access [2015/11/12 13:38] (current) – removed redox
@@ Line 1: / Line 1: @@
-# JTAG access
-## Overview
-As detailed on the Schematic (released in the FCC documents), the Nabaztag:tag board breaks out the JTAG port. Let's see how to use it to access the CPU to be able to flash and debug some code !
-## Hardware
-### Nabaztag:tag
-Well, of course you need a Nabaztag:tag ( a version 2 ). You also must be ready to open it.
-Grab a small flat screwdriver and remove the four screws on the base. You can also use a triangle screwdriver if you happen to have one, I don't.
-And this is about it. the JTAG header is on the top left corner of the board.
-Pinout is the following (top to bottom):
-^ Pin ^ Function ^
-|  1 | Vcc      |
-|  2 | GND      |
-|  3 | nTRST    |
-|  4 | TDI      |
-|  5 | TMS      |
-|  6 | TCK      |
-|  7 | TDO      |
-|  8 | RESETN   |
-### JTAG probe: BusBlaster
-## Software: OpenOCD
-### Pacth and compile
-### Usage
-## Pictures
-{{.:jtag:nabjtag.jpg?250| BusBlaster connected to the Nabaztag, side view}} {{.:jtag:nabjtag_bottom.jpg?250| BusBlaster connected to the Nabaztag, bottom view}}
-## Links