Differences

This shows you the differences between two versions of the page.

--- elec:esp8266:nodemcu [2015/11/07 11:52] – [NodeMCU] redox
+++ elec:esp8266:nodemcu [2023/11/24 21:55] (current) – external edit 127.0.0.1
@@ Line 5: / Line 5: @@
 So, I got a cheap NodeMCU board from eBay. Here are some notes to get started with the ESP8266 !
-## Requirements
+## Basic use
 ### ESPTool
@@ Line 44: / Line 44: @@
 Wait until completion...
-### NodeMCU from source
+    Connecting...
+    Erasing flash...
+    Writing at 0x00070c00... (100 %)
+    Leaving...
+Reset your board (powercycle). Connect using a serial app, like _picocom_
+    picocom /dev/ttyUSB0
+And you should be ready to go ! More info on NodeMCU usage, on the github page: https://github.com/nodemcu/nodemcu-firmware
+### Connect to your AP
+In the serial terminal:
+    wifi.setmode(wifi.STATION)
+    wifi.sta.config("SSID","password")
+    ip = wifi.sta.getip()
+    print(ip)
+Output is the current IP of your board. Open a new terminal and try to _ping_ it =)
+This setting is kept in flash I guess, since it still works after powercycling the board...
+## Build from source
 Grab the firmware from github: https://github.com/nodemcu/nodemcu-firmware
@@ Line 51: / Line 76: @@
     cd nodemcu-firmware/
+FIXME Todo