elec:esp8266:wifinfo
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
elec:esp8266:wifinfo [2016/02/01 10:35] – [ Overview] redox | elec:esp8266:wifinfo [2016/02/01 10:50] – [Upload] redox | ||
---|---|---|---|
Line 6: | Line 6: | ||
## Hardware | ## Hardware | ||
+ | |||
+ | ### PCB | ||
+ | |||
+ | I uploaded the files on OSHPark and also shared them, so anyone can easily order them: [OSH Park](https:// | ||
+ | |||
+ | ### BoM | ||
+ | |||
+ | ### Tools | ||
+ | |||
+ | You need: | ||
+ | |||
+ | - A decent (250mA) 5v PSU, like a phone charger, or a battery. | ||
+ | - An USB-Serial adapter, which can easily be sourced from eBay. | ||
+ | |||
## Software | ## Software | ||
### Tools | ### Tools | ||
+ | |||
+ | The firmware is an Arduino sketch, so you will need: | ||
+ | |||
+ | - The Arduino IDE | ||
+ | - The ESP8266 _extension_ for the Arduino IDE | ||
+ | - The " | ||
+ | - Some libraries such as: | ||
+ | - NeoPixelBus, | ||
+ | - | ||
### Firmware | ### Firmware | ||
+ | |||
+ | Grab the firmware from the LibTeleinfo Github project | ||
### Upload | ### Upload | ||
+ | |||
+ | #### | ||
+ | |||
+ | You need to put a jumper on the board between the __TX__ and __TX1__ pins, on the three pin header on the right. | ||
+ | |||
+ | Connect your serial Adapter to the board (on the six pins header on the right): RX on TX, TX on RX, GND on GND. | ||
+ | I used an external power supply but you can also probably use the 5v pin to power the board. | ||
+ | |||
+ | To put the ESP8266 in _Flash mode_, press the Flash switch, hold it, press the Reset switch, relase Reset, release Flash. Should be ok. | ||
+ | |||
+ | #### Upload the data | ||
+ | |||
+ | |||
+ | |||
+ | #### Upload the firmware | ||
## Links | ## Links | ||
+ | |||
+ | * [Github project](https:// | ||
+ | * [LibTeleinfo](https:// |
/home/share/www/redox.ws/wiki/data/pages/elec/esp8266/wifinfo.txt · Last modified: 2023/11/24 21:55 by 127.0.0.1