Differences

This shows you the differences between two versions of the page.

--- gnulinux:cross [2015/03/24 17:31] – [LibFTDI] redox
+++ gnulinux:cross [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-# Cross-compile OpenOCD on GNU/Linux for Windows
-## Overview
-The following was done using OpenOCD 0.8.0 and Archlinux x86_64. Target OS is Windows 7 32bits, but it should also work for 64bits versions.
-## Requirements
-You need a few packages. Some already exist in community or in AUR so:
-    yaourt -S mingw-w64-gcc mingw-w64-libusb mingw-w64-hidapi
-### LibFTDI
-Download this pkgbuild, make your package and install it: {{:gnulinux:pkgbuild:mingw-w64-libftdi.tar.gz|}}
-    makepkg
-    yaourt -U ./mingw-w64-libftdi*.tar.xz
-### LibUSB-compat
-Download this pkgbuild, make your package and install it: {{:gnulinux:pkgbuild:mingw-w64-libusb-compat.tar.gz}}
-    makepkg
-    yaourt -U ./mingw-w64-libusb-compat*.tar.xz
-#### Fix
-Here's the trick, you need to remove the existing usb.h from mingw-w64-headers to be able to install mingw-w64-libusb-compat. There must be a better way to fix this conflict but I didn't have much time to investigate...
-## OpenOCD compilation
-Get openocd-0.8.0.tar.bz2 from Sourceforge
-    tar xavf openocd-0.8.0.tar.bz2
-    cd openocd-0.8.0
-    # Eventually apply the patches you want
-    autoreconf -fiv
-    mkdir build
-    cd build
-    HIDAPI_LIBS="-lhidapi" ../configure --build=i686-pc-linux-gnu --host=i686-w64-mingw32 --disable-shared
-    make -j8
-Get __openocd.exe__ from _build/src/_
-It will require the DLL files from  _/usr/i686-w64-mingw32/bin/_
-## Running OpenOCD
-Put the executable and the DLL in the same folder. Install WinUSB drivers for you device (maybe using Zadig). And you should be able to run OpenOCD =)