arm:stm32f103c8t6_bmp
This is an old revision of the document!
# STM32F103C8T6 Dev board as BlackMagic Probe
## Flash BlackMagic firmware
Set BOOT0=1, BOOT1=0 with the onboard jumpers. Pick a decent USB adapter and:
stm32flash -w ./src/blackmagic_dfu.bin -v -g 0x0 /dev/ttyUSB0
Unplug everything, set BOOT0=0, BOOT1=0, connect the USB cable and:
./scripts/stm32_mem.py ./src/blackmagic.bin
/home/share/www/redox.ws/wiki/data/attic/arm/stm32f103c8t6_bmp.1423605044.txt.gz · Last modified: 2023/11/24 21:55 (external edit)