Differences

This shows you the differences between two versions of the page.

--- avr:t44:insoled [2013/12/16 16:32] – Remove the "Schematics" part, 'cause I didn't make any... redox
+++ avr:t44:insoled [2014/01/30 08:34] (current) – removed redox
@@ Line 1: / Line 1: @@
-# InsoLED
-## Overview
-In a few words, it's a LED-based PCB exposure box. Most designs of PCB exposure boxes are based around UV-tubes, or a lot of 5mm UV leds. I chose to try with 1W UV-LEDs. The design aims to be:
-* Portable
-  * Not fragile, like UV-tubes are.
-  * Small, since I rarely need to expose an A4-sized PCB.
-  * Big enough for standard sizes of PCB, I chose to go with 100x160mm which is already more than what I'm used to.
-* Easy to use
-  * Autonomous: Put your PCB in, start, come back when it's done
-  * Adjustable, since different PCB, traces sizes, ... require different exposure parameters.
-## Picture
-## PCB
-## Case
-## SVN Repository
-Right now, that's the only resource available. The whole project is under GPLv3, so feel free to improve it.
-    svn co http://svn.redox.ws/svn/InsoLED