avr:t44:insoled
This is an old revision of the document!
# InsoLED
## Overview
In a few words, it's a LED-based PCB exposure box. Most designs of PCB exposure boxes are based around UV-tubes, or a lot of 5mm UV leds. I chose to try with 1W UV-LEDs. The design aims to be:
* Portable
- Not fragile, like UV-tubes are.
- Small, since I rarely need to expose an A4-sized PCB.
- Big enough for standard sizes of PCB, I chose to go with 100x160mm which is already more than what I'm used to.
* Easy to use
- Autonomous: Put your PCB in, start, come back when it's done
- Adjustable, since different PCB, traces sizes, … require different exposure parameters.
## Picture
## PCB
## Case
## SVN Repository
Right now, that's the only resource available. The whole project is under GPLv3, so feel free to improve it.
svn co http://svn.redox.ws/svn/InsoLED
/home/share/www/redox.ws/wiki/data/attic/avr/t44/insoled.1387211539.txt.gz · Last modified: 2023/11/24 21:55 (external edit)