User Tools

Site Tools


elec:esp8266:wifinfo

This is an old revision of the document!


# WifInfo

## Overview

A few months ago, I came across a project called Wifinfo. It's a small board, based on an ESP8266, which retrieves information from the French power meters and displays them, or sends them across the network. The PCB was cheap, and I though I could use one, so I built some boards ! Turns out, I can't use them: the telemetry option is disabled in my power meter…

## Hardware

### PCB

I uploaded the files on OSHPark and also shared them, so anyone can easily order them: [OSH Park](https://oshpark.com/shared_projects/Rjzd7tY7)

### BoM

Part(s) ref on design Qty Name Doc Supplier SupplierRef
Resistors
R1, R2, R4, R5, R6, R7, R8 7 10K 0603 SMD Resistor N/A Mouser 667-ERJ-3GEYJ103V
R3, R11, R12 3 4.7K 0603 SMD Resistor N/A Mouser 667-ERJ-3GEYJ472V
R9 1 100K 0603 SMD Resistor N/A Mouser 667-ERJ-3EKF1003V
R10 1 470R 0603 SMD Resistor N/A Mouser 71-CRCW0603J-470-E3
Capacitors
C3, C4, C5 3 100nF 0603 SMD Capacitor N/A Mouser 80-C0603C104K4R
C1, C2 2 10uF 0805 SMD Capacitor N/A Mouser 81-GRM21BC81C106KE5L
LED
LED 1 Red 0603 SMD LED 20mA N/A eBay 20x 0603 R,G,B,Y,O,W
Power & Signal
D1, D2, D3, D4, D5 5 Diodes schottky 1A 20V N/A Mouser 511-STPS140Z
U1 1 3.3V 800mA LDO Regulator Link Mouser 621-AZ1117CR-3.3TRG1
OK1 1 Phototransistor Link Mouser 859-LTV-814S
Q1 1 Mosfet Channel N Link Mouser 512-BSS138
Headers & Sockets & Switchs
Flash, Reset 2 SMD Tactile switch N/A Mouser 611-KMR211NGLFS
PWR,TINFO 2 3.5mm Screw header 1×2 N/A eBay
uC
ESP 1 ESP07 or ESP12 module Link Aliexpress

### Tools

You need:

- A decent (250mA) 5v PSU, like a phone charger, or a battery. - An USB-Serial adapter, which can easily be sourced from eBay.

## Software

### Tools

The firmware is an Arduino sketch, so you will need:

- The Arduino IDE. I used v1.6.7, from [the Arduino website](https://www.arduino.cc/en/Main/Software) - The ESP8266 _extension_ for the Arduino IDE, from [Github](https://github.com/esp8266/Arduino) - The “ESP8266 Sketch data upload” tool for the Arduino IDE, from [Github](https://github.com/esp8266/arduino-esp8266fs-plugin/releases/) - Some libraries such as:

  1. NeoPixelBus, for ESP8266. Make sure to fetch a working branch, from [Github](https://github.com/Makuna/NeoPixelBus).

I took a “random” one, and it compiles fine, but the LED doesn't work properly…

### Firmware

Grab the firmware from the LibTeleinfo Github project, in the `examples/Wifinfo`folder.

There's currently a bug in the index.html file: the [issue](https://github.com/hallard/LibTeleinfo/issues/3) with a _fix_, on Github.

### Upload

#### Wiring and process

You need to put a jumper on the board between the TX and TX1 pins, on the three pin header on the right.

Connect your serial Adapter to the board (on the six pins header on the right): RX on TX, TX on RX, GND on GND. I used an external power supply but you can also probably use the 5v pin to power the board.

To put the ESP8266 in _Flash mode_, press the Flash switch, hold it, press the Reset switch, relase Reset, release Flash. Should be ok.

Select the good board type and options (the default ones are usually okay).

#### Upload the data

* Load the Wifinfo sketch * Put the ESP266 in _Flash mode_ * Tools > ESP8266 Sketch Data upload

#### Upload the firmware

* Load the Wifinfo sketch * Put the ESP266 in _Flash mode_ * Upload sketch

## Links

* [Github project](https://github.com/hallard/WifInfo) Schematic and PCB files * [LibTeleinfo](https://github.com/hallard/LibTeleinfo) Firmware

/home/share/www/redox.ws/wiki/data/attic/elec/esp8266/wifinfo.1454332540.txt.gz · Last modified: 2023/11/24 21:55 (external edit)