Hydev

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<!DOCTYPE markdown>
# PIC 10F206

I bought theses ones because they were cheap at a local store... They are __REALLY__ small.

# RGB Flash

As of today, I've just made one small board to try to:

* Solder them
* Program them

And I've had mixed results:

* Finding the correct orientation is the first problem...
* After that, it's just SMD soldering, it went well.
* I forgot to add a programming header on the board to use the ICSP, so I soldered two wires as a quick fix.
* <del>Annnnnddd I can't get them recognized by my PIC programmer... so... __STALL__</del>
* Actually, the PIC10F206 can't be auto-detected (looks like this isn't possible with the Baselines devices), so it worked all along...

{{ :pic:dsc_0203.jpg?direct&450 |}}
Crappy picture, sorry, the PIC is just next to the RGB LED...

## PCB

{{:pic:10f206_breakout.jpg?direct&200|Breakout board}} {{:pic:10f206_rgbled.jpg?direct&200|5050 RGB Led}} \\ 
Print at 600 DPI to get the correct Size.

## Code
I made a simple code, with a Makefile to simplify the whole process... it's _{{pic:ledflash.tar.gz|Here}}_