Main
GNU/Linux
Dev
Make
Stuff
Sidebar
elec:arm:stm32:stm32f103c8t6_bmp
STM32F103C8T6 Dev board as BlackMagic Probe
Flash BlackMagic firmware
Set BOOT0=1, BOOT1=0 with the onboard jumpers. Pick a decent USB adapter and:
stm32flash -w ./src/blackmagic_dfu.bin -v -g 0x0 /dev/ttyUSB0
Unplug everything, set BOOT0=0, BOOT1=0, connect the USB cable and:
./scripts/stm32_mem.py ./src/blackmagic.bin
/home/share/www/redox.ws/wiki/data/pages/elec/arm/stm32/stm32f103c8t6_bmp.txt · Last modified: 2019/12/25 15:40 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
