Differences

This shows you the differences between two versions of the page.

--- rc:dev:sport_master [2014/09/16 22:31] – [ Overview] redox
+++ rc:dev:sport_master [2023/11/24 21:55] (current) – external edit 127.0.0.1
@@ Line 11: / Line 11: @@
 Luckily the Teensy3 can do that. If you don't want to mess with voltage conversion, just use a Teensy3.1.
-Most of the information comes from the OpenTX firmware, information on the Internet and direct analysis of the communication bus.
+Most of the information comes from the OpenTX firmware, information on the Internet and direct analysis of the communication bus, so it might not be perfectly accurate.
@@ Line 22: / Line 22: @@
 <note important>This is experimental work. Do this at your own risks.</note>
+## Next ?
+* Forge UBX/NMEA packets from SPort GPS data
+* Serial/SPI/I2C output (something standard =) )
+* Write a TauLabs module, like the existing one for the Hub Telemetry
+* Attiny(25/45, or 85 but it might be overkill) port with serial output, with Low power mode so it can be embedded on virtually any other flight controller
+* Support more sensors
 ## Links